Sunday, January 24, 2010

de-ICED, What next?

First, thanks to those folks on various forums who have responded to my questions. I was able to remove the starter which was the last thing connecting the engine to the tranny. They are now separated. Progress showni in last six photos in the album (click on blog title to view). Need to clean car up and figure out what to do next.

Monday, January 18, 2010

Free at last


Finally got the engine out. Took a saw to cut most of the head of that pesky bolt off and then filed until the axle came free of the transmission. Next steps are to remove a few more ICE parts and clean.

Sunday, December 6, 2009

2 steps back, 0 steps forward

Still can't get the last bolt holding the axle to the tranny. Got an air compressor with an impact wrench and ratchet wrench. Put the two bolts in on either side of the problem bolt and still couldn't get the last one loose.

Wife is not happy as lack of progress means a long cold winter without being able to park in the garage.

Tuesday, September 29, 2009

I got the tranny disconnected and started to lift but the engine is stuck. There's not enough room. Not sure what to do next.



Here's a nice pic of a friend of Sam's who came over to check things out.

Monday, September 28, 2009

Lift-off (out) postponed

I thought the engine/tranny was connected to the frame with three engine mounts, two bolts on the side and one connection in front. After removing these three connections I started to lift. Something didn't feel right. I looked under the car (again) and noticed that the tranny seems connected to the underside.

Thanks to a post on a VWvortex forum, I now know that I need to remove 2 bolt connecting the tranny to the floor plan. Maybe tommorow.

Sunday, September 27, 2009

10-9-8...3-2-1 Lift off (almost)

We (Stu and I) disconnected the axle from the outer CV joint (basically disconnected the axle from the wheel). The only thing left connecting the engine to the car were the engine bolts . We connected the lift, removed the engine bolts (holding the engine from the frame) and started to lift. The passenger side started coming up higher than the driver which didn't seem right. Also the intake manifold hit the frame. We ran out of time. But at least we're doing something interesting.

Friday, August 21, 2009

Out of gas (tank)

Stu and David came over today. Made progress. We got the gas tank out. Apparently, did not get all gas out of tank. No smoking at our house for a while please. Postponed trying to disconnect transmission from cv joint due to one lousy stinking bolt/screw (see previous post). Instead we're going to disconnect axle from wheel, lift the engine and then try to disconnect transmission from axle.

For photos see:
http://picasaweb.google.com/lh/photo/kf5VrOUFx1JQ5FvQmzBORA?feat=directlink
http://picasaweb.google.com/lh/photo/G4g56dIXwqUpbtMMJHEpJg?feat=directlink
http://picasaweb.google.com/lh/photo/9SD77l7e7LUtXk5FO1RDkA?feat=directlink
http://picasaweb.google.com/lh/photo/OItLGJQclehoJ-YVNXE-8g?feat=directlink